BFGOODRICH G FORCE COMP 2 SIZES DRIVERS
Inflation Increase (psi) 0 1.5 3.0 4.5 6.0 7.5 7.5 7.5 7.As BFGoodrich’s Ultra High Performance Summer tire developed for the drivers of sports cars, sporty coupes, performance sedans and modern muscle cars looking for the next level of control and fun, the g-Force Sport COMP-2 is designed to accelerate faster, corner harder and brake shorter in dry and wet conditions. Inflation Increase (psi) 0 1 2 3 4 5 5 5 5 In the absence of specific recommendations by the vehicle manufacturer, use the following guidelines based on those in the European Tyre and Rim Technical Organization Standards Manual.įor speeds over 160km/h (100 mph), load and inflation must be adjusted according to the table below. Exceeding the lawful speed limit is neither recommended nor endorsed.įor high-speed driving, additional inflation pressure and possibly reduced tire loading and/or upsizing is required. When a customer requests a replacement tire with a lower speed rating than the original equipment tire, you must clearly communicate to him or her that the handling of the vehicle may be different, and that its maximum speed capability is limited to that of the lowest speed-rated tire on the vehicle. Inflation pressure increase must not exceed the maximum pressure branded on the tire sidewall.
BFGOODRICH G FORCE COMP 2 SIZES MANUAL
Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner's manual for its recommendations.ĭANGER: Never mount a 16" diameter tire on a 16.5" rim.ĭANGER: Never mount a 17" diameter tire on a 17.5" rim. Only tire professionals should mount tires and they should never inflate beyond 40 psi to seat the beads. Serious injury or death may result from explosion of tire/rim assembly due to improper mounting. To ensure correct air pressure and vehicle load, refer to vehicle owner's manual or tire information placard on the vehicle. WARNING: Serious or fatal injury may result from tire failure due to underinflation or overloading. Tires for a particular dimension of a given tireline may vary in appearance from the tire shown in the photograph. > Tread patterns are often tuned to accomodate different tire widths. > Section width varies approximately 0.2" (5mm) for every 0.5" change in rim width. Some tires may vary from this value by +/-3% of the section height (affecting overall diameter), and +/-4% of the section width. > The sizes shown are average design values for tires measured on specified measuring rim widths. # The Load and Speed Index data are not shown on the tire sidewall and are provided for information only purposes.
0 kommentar(er)
